CD Disc Generator – Generator From Motor with CD’s Turbine Model

Basic CD Disc Generator – Generator From Motor with CD’s Turbine Model

Generator from Motor (With Simple CD’s Turbine) – CD Disc Generator) from Trash.

Requirements

• 2 old CD Disks
• 12V Motor as a Generator (Tape recorder or toy car motor)
• Straw
• Rubber sheet
• Flexible Wire
• Metal clip
• Insulated Copper Wire
• 2 Nuts and bolts
• LED x 1pc
• Wooden Stand
• Washers
• Small Pulley
• Big Rubber Band
• Bobbin

Procedure

• Sandwich a smaller diameter rubber between two old CD disks to make a big pulley.
• place a long screw In the lower hole of the Wooden Stand.
• Then put a machine bobbin, washer, CD pulley, washer and a nut. Fix a long screw handle to the CD pulley.
• Connect LED to the motor (as a generator) Terminal by flexible wires.
• Tightly fix metal clip on motor on wood piece.
• Fix a small plastic pulley on the threaded end of the motor. connect the small and big pulley with a large rubber band. When rotate & turn the handle, the armature will rotate in the magnetic field (in the case above, Motor will work as a generator). This spinning armature will generate a current in the coil which will light up the LED.

Note That Generator works only in one direction.

Image Story of Generator from Motor (With Simple CD’s Turbine) . ( CD Disc Generator) from Trash Step by Step Procedure.

Read More about Simple Projects from trash like this here: Simple Electrical Projects