Circuit Analysis
-
Is it Possible to Operate a 50Hz Transformer on 5Hz or 500Hz Frequency?
What Happens if a 50Hz Transformer is Connected to 5Hz or 500Hz Supply Frequency? What would happen if a power transformer designed for operation on 50Hz frequency were connected to…
Read More » -
What Happens When an AC Line Touches a DC Line?
What Happens When DC Equipment are Operated on AC Voltage and Vice Versa ? AC and DC Mixed Operated Devices There is no simple, one-word answer like ‘Yes’ or ‘No’…
Read More » -
Analysis of Reactive Power in Power System
Analysis of Reactive Power in Power System Reactive power is an imaginary power, but still, it is needed in the Power System. If reactive power is in excess in Power…
Read More » -
Analysis of a Simple R-L Circuit with AC and DC Supply
Analysis of a Simple R-L Circuit and Inductor Behavior Analysis of a Simple R-L Circuit with DC Supply: The circuit shown in Figures-1 is a simple R-L circuit (it has…
Read More » -
Steady State Error & PI Controllers
Steady State Error & PI Controllers – Effect of PI Controller on Steady State Error A steady-state error is defined as the difference between the desired value and the actual…
Read More » -
Open Delta Connections of Transformers
Open Delta Connections of Transformers Suppose you have three single-phase transformers of 5 KVA each. They are connected in (both primary & secondary sides) in delta, then we can say…
Read More » -
Resistor Color Code Calculator – 3, 4, 5 & 6 Band Resistors Calculation
3, 4, 5 and 6 Band Resistor Color Code Calculators Resistor color codes are used to indicate the value of resistance defined by the Radio Manufacturer association in 1920 according…
Read More » -
Nyquist Stability Criterion – Examples and MATLAB Coding
Nyquist Stability Criterion – MATLAB Code with Examples The Nyquist criterion is widely used in electronics and control system engineering, as well as other fields, for designing and analyzing systems with feedback. While Nyquist…
Read More » -
Time Response of Second Order Transfer Function and Stability Analysis
Time Response of Second Order Transfer Function and Stability Analysis In this article we will explain you stability analysis of second-order control system and various terms related to time response…
Read More » -
Which Bulb Glows Brighter When Connected in Series and Parallel & Why?
Two Bulbs of 80w and 100w are Connected in Series and Parallel. Which One Will Glow Brighter and Why? The most frequently asked and confusing question we receive is: If…
Read More »
