fbpx
BatteriesElectrical DesignElectrical EnergyElectrical Wiring InstallationHow ToRenewable & Green EnergySolar Panel System

Basic Components Needed for Solar Panel System Installation

General Requirements for a Solar Panel System Installation

Green energy, the clean and renewable solar energy is the best alternative for residual and industrial consumers around the world. It minimizes the overall running cost and carbon environmental pollution. The opt-out transform percentage from regular power sources to the green energy, especially solar power is rapidly growing in the US, EU, China, Middle East and Asia.

Solar Panel System

Solar panel (also known as photovoltaic cell or solar cell) is a device which absorbs photos from the sun light and converts to the electrical energy.

In recent years, the concept of of-grid and smart grid system is more populated and consumer opting out for clean energy like wind and solar power system to eliminate or at lease reduce the dependency on regular power from electricity provider and reduce the overall running cost as well. An efficient solar power system with warranty for many years will lead to recover the initial cost and free energy.

Main Components of a Solar Panel System

Below are the basic and general components and devices which needed for a solar panel system installation at home. Details of each device is given below each section.

Main Components of a Solar Panel System

(1) Solar Panel

Solar panel also known as Solar Cell or Photo Voltaic Cell is the backbone of solar power system. There are some types of solar panels such as polycrystalline and monocrystalline. Monocrystalline is more efficient and little bit expensive as compared to polycrystalline solar panels. The selection criteria for a solar panel are different i.e. space, warranty, efficiency, technology type, cost etc. Keep in mind that output is the king when selecting a proper solar panel for residential solar power installation.

In general, the solar panel is directly connected to the charge controller but there are different connection of solar panel arrays such as series and parallel connection which depends on load calculation and specific energy requirement for home appliances, battery bank connection, roof surface space, climate and peak sunshine hours.

You can easily find the number of required solar panels and charging current for battery and follow the step by step guide for solar panel installation with inverter rating, backup power of batteries according to the load requirement.

In fig below, a 120 watts, 12V and 10A solar panel is shown which produce 12V DC supply for direct battery charging and DC load can be directly connected through it via charge controller.

120 watts, 12V, 10A solar panel
Fig -120W, 12V, 10A Solar Panel

(2) Charge Controller

As the name suggests, a charge controller (also known as charge regulator) is a device which is used to regulate the voltage and current from the solar panels connected to the batteries. The main purpose of a charge controller is to prevent the overcharging of batteries (which may lead to damage the battery as well) through solar panels as 12V solar panels provided 17-20V in case of no load or full sunshine. The reason behind this scene is that manufacture desin a solar panel for different climate and environment so that, you get the max rated voltage in case of cloud cover, low sunshine and heavy haze etc.

There are multiple types of charge controllers are available in the market such as follow:

  • Simple – 1 and 2 Stage Charge Controllers: Relay and shunt resistor are used to control the voltage in single or two stages to disconnect the solar panel from the battery in case of over voltage.
  • PWM (Pulse Width Modulation) – 3 Stage Charge Controllers: It based on pulse with modulation and cutoff the battery circuit from the connected solar panel from the photo-voltaic cell in case of overcharging.
  • MPPT (Maximum Power Point Tracking) Controllers: MPPT is a DC to DC converter in case of solar panels array to the battery bank. It optimize and regulate the higher DC voltage levels from the solar panel and convert to the lower optimized and regulated voltage to charge the battery. These are little bit expensive but more efficient. They provide 10-30% more power to battery with efficiency of 94-98%.

In fig below, a 5-100 Ampere MPPT Charge Controller is shown which can be used for 12-48V battery bank and the max rating for solar panels system is 170A, 150V.

5-100 Ampere , 12-48V, Max 170A, 150V, MPPT Charge Controller
Fig – 100A, 12-48V, Max 170A, 150V, MPPT Charge Controller

(3) Battery

Batteries are used for backup charge storage. there are different types of batteries used in solar power system for storage and backup operation at overnight when the direct power from solar panels are not available. Series, parallel  or series-parallel connection of batteries bank is depends on the system design i.e. 12V, 24V or 48V system configuration. In case of clouds and no sunshine, the battery bank can be charged through AC supply from power grid via inverter for later use.

The following fig shows a 150Ah, 12V. The battery is directly connected to the charge controller which control the incoming charging currents and voltage from the photovoltaic cell connected to the charge controller for backup storage and operation.

150Ah, 12V Solar Battery
Fig – 150Ah, 12V Solar Battery

(4) Inverter / UPS

Inverter is a device which convert the DC power supply to the AC power supply. Inverter and converter which known as UPS (Uninterruptible Power Supply) is used to convert the DC voltage to AC for AC operated home appliances. UPS is also used to convert the AC to DC to charge the battery from direct AC power supply.

There are many types of inverters available in the market according to your needs such as follow:

  • Centralized or String Inverter with less cost but inefficient.
  • Power Optimizer used to convert DC to AC and connected to central inverter.
  • Micro Inverter with smooth and reliable operation even with low sunshine but costly.

The following fig shows a 1000 Watts, 12 V DC to 110VAC and 230V AC inverter. It is connected between battery and load to convert battery output (12V DC to 230V AC) to our home appliances which operate on 230V AC. The second slot is for 110-120V AC operated equipment.

1000 Watts, 12 V DC to 110VAC and 230V AC inverter
Fig – 1000W, 12 V DC to 110VAC and 230V AC Inverter

Which one is the Best Solar Panel for Home and How Much Does it Cost?

monocrystalline solar panels are better option than polycrystalline but they are little bit expensive. The final decision depends on many factors such as your region and environment, sunshine hours, load requirements and types of batteries used in the system etc. We have already discussed the topic in details as it depends on many factors such as load, space, environment, technology, backup hours etc and all these factors should be considers while selecting a proper solar panel installation system according to the requirements. The post can be seen here.

Related Posts:

Tags
Show More

Electrical Technology

All about Electrical & Electronics Engineering & Technology. Follow , Twitter , Instagram, Pinterest, YouTube, & Linkedin to get the latest updates or subscribe Here to get latest Engineering Articles in your mailbox.

23 Comments

  1. Ajay Sharma says:

    The energy that your solar panel system collects is clean, efficient and most importantly free. The system collects the sun during daylight hours all year round and converts this free energy into AC current that powers every single appliance in your home. Obviously the production of the solar panels and solar inverter does expend energy and materials, but with solar panels

  2. Mark F. Clair says:

    Thanks for sharing the information. I am considering a solar panel system installation. Do I need an electrical inspection before that? What is actually the importance of a home electrical inspection ?

  3. Thanks for sharing this blog. I like this blog very much. really such an nice and decent information shared here with awesome stuff about solar power systems.

  4. Usama Umer says:

    Please tell me which solar panel is best
    mono crystalline or poly crystalline?

    1. Sammy Great says:

      It depends on your region and the sun peak hour. But I preferred mono crystal panel.because it adopt both weather conditions. Eg sunny,cloudy cool weather.

    2. As we have discussed before, monocrystalline is better option than polycrystalline. But is little bit expensive as compared. But the final decision depends on your specific requirements i.e. load, sunshine hours etc.

    3. Dennis Abayomi says:

      Monocrystalline

    4. Stray Cat says:

      Mono, since it has better efficiency and heat handling, but poly is more cheaper than mono.

  5. I read your article on solar installation at home. it was very useful for me thank again for the article.

    i want to know one thing, in your article you calculate the load of 800 watt and ask for 6 panels for of 20 A for battery charging and 10 A for direct load. But i have a question that in home every time we does switch on 800 watt load e.g we require on 100 watt in the morning only one or two lights or fan. the the solar panel produce the 30 A current. Hence the load is only 100 watt .

    is solar panel give the excessive current to the battery or inverter or it raise the high output voltage from the inverter.

    please guide in this regard

      1. Sudhir Desai says:

        It’s extremely nice of you to share the knowledge with others without any expectation of monetary compensation.

        That’s a commitment to be selfless.
        Congratulations.

      2. Salam o alikum Osama Bhai thank you please explane me how much solar I need for one ac?
        1 fan 1 fridge and some lights.
        How much solar panel we need for this setup
        We need all day and night current.

    1. The current is utilised by the inverter and any excess stored by the battery.If the battery is already full the controller blocks the excess to prevent overchargeing of the battery

  6. Solar Albuquerque says:

    Installing a home solar energy system is the best way to beat rising electricity costs. You are also greatly helping our environment by producing clean energy from a renewable source.

  7. Hariprasath says:

    I referred off-grid power system because in night power will be cut means used in battery so referred to off grid power

  8. Dimple Nadkarni says:

    Want to install solar panel at home.

  9. Bokone mogano says:

    Good day, thank you for the shadding more light on the solar system. Am about to venture into the business because I really love the idea, it will help alot of people. What a way to harness the energy.

  10. Shailesh Sharma says:

    I installed solar panels at hoom & office.

  11. Gautam Bahare ARMYMAN says:

    I am an army man and want to install 3kv solar plant on my roof, plz suggest me best one and price, subsidies on it.

  12. Paul kelly says:

    Don’t brother. right now it’s a waste of money as the new solid state batteries will be out before you could break even.
    What needs to be done is to put pressure on the department of the environment to get the electricity supply board to buy any solar power electricity made in residential units. or wait for the solid state batteries to be available. but by then the next gen of infrared solar cells should be out. right now the smart money just buys power the old fashioned way

  13. Gerard Onuoha says:

    Is there any alternative to deep cycle batteries as they are very expensive in my country Nigeria?

  14. Ram Moralwar says:

    Sir in my collage the solar based street light is my final year project so can you say how I make the solar based auto cut street light

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close
Close

Adblock Detected

Please consider supporting us by disabling your ad blocker