AC FundamentalsAlternating CurrentElectrical FundamentalsFormulas - Equations

Basic Electrical Formulas

Formulas for Basic Electrical Quantities and Parameter

The following chart provides a list of basic electrical formulas with definitions to calculate and measure basic electrical parameters and quantities. (Formula chart is given below).

Voltage

Voltage is the electric potential difference or electrical force that pushes electric charges through a circuit. Its SI measuring unit is the “Volt” and is denoted by the symbol (V) or (E).

Mathematically,

V = W / Q

Where:

  • V = Voltage (in Volts)
  • W = Work done (in Joules)
  • Q = Electric charge (in Coulombs)

The relation formula of voltage using ohm’s law is follow:

V = I × R

Where:

Electric Current

Electric current is the flow of electric charge (typically electrons) through a conductor. Its SI measuring unit is the “Ampere” and is denoted by the symbol (A).

The relation formula of eclectic current:

I = V ÷ R

Resistance:

Resistance is the opposition that a material offers to the flow of electric current. Its SI measuring unit is the “Ohm” and is denoted by the symbol (Ω).

The relation formula of resistance:

R = V ÷ I

Electric Power

Electric power is the rate at which electrical energy is transferred or consumed. Its SI measuring unit is the “Watt” and is denoted by the symbol (W).

The relation formula of electric power:

P = V × I

Electric Charge

Electric charge is a fundamental property of matter, either positive or negative, responsible for current. In other words, the deficiency or excess of electrons in a material is known as electric charge. Its SI measuring unit is the “Coulomb” and is denoted by the symbol (Q).

The representative formula for electric charge:

Q = I × t

Capacitance

Capacitance (C) is the ability of a capacitor to store electric charge. Its SI measuring unit is the “Farad” and is denoted by the symbol (F).

The representative formula for capacitance:

C = Q ÷ V

Inductance

Inductance (L) is the property of an inductor to resist changes in the flow of electric current. Its SI measuring unit is the “Henry” and is denoted by the symbol (H).

The representative formula for inductance:

L = (µ0 N2 A ) ÷ l

Impedance

Impedance (also known as AC Resistance) is the combined opposition of a circuit to the flow of alternating current (AC), encompassing both resistance and reactance. Its measuring unit is the “Ohm” and is denoted by the symbol (Z).

The representative formula for impedance :

Z = √(R2 + X2)

Conductance

Conductance (G) is the measure of a material’s ability to conduct electric current, the reciprocal of resistance. Its SI measuring unit is the “Mho” or “Siemen” and is denoted by the symbol (℧) or (S) respectively.

The representative formula for conductance:

G = 1 ÷ R

Frequency

Frequency (f) is the number of complete cycles or oscillations of a wave or a repeating event (such as alternating current) occurring in a unit of time. Its SI measuring unit is the “Hertz” and is denoted by the symbol (Hz).

The relation formula for frequency:

f = 1 ÷ T

Time period

Time period (T) is the duration it takes for a wave or repeating event to complete one cycle. Its SI measuring unit is the “second” and is denoted by the symbol (s).

The relation formula for time period:

T = 1 ÷ f

Click image to enlarge or open in a new tab

Basic Electrical Formulas
Basic Electrical Quantities Formulas

Related Formulas & Equations

➡️ READ FULL ARTICLE 📖

Electrical Technology

All about Electrical and Electronic Engineering & Technology. Join us on WhatsApp at Electrical Technology Official Channel, to receive the latest content, articles, and updates. You can also like and follow our social media networks below, or subscribe with your email to receive premium engineering articles in your mailbox.

10 Comments

  1. avenirelectricalconsultants says:

    Hey great stuff, thank you for sharing this useful information and i will let know my friends as well. Electrical Consultants.

  2. David Warner says:

    I really appreciate this blog and I will sure promote this blog to others in my circle. If you want technician for you network please visit it outsourcing Indianapolis

  3. learnmore marungisa says:

    i really thanking for information that you are publishing to me.

  4. ampalavanar sampanthar says:

    I am a professional electrical engineer.I saw this web page for the first time today, good information are given in simple language. good.

    1. Ferooz Hussain says:

      I am student of Electrical Engineering .can you help me in Programming of PLC

  5. Rikhi dhiwar says:

    Sir welding machine ka circuit diagram mileag……

    1. ami jakcson says:

      pura welding machine milega ..adress do apna

  6. kandeh Hassan kargbo says:

    am a student of this faculty

  7. Nand lal mahato says:

    How to test earth resistance?

  8. Dixit Chandrakant says:

    Very good article on solar power unit
    Everybody should vaait the same

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Kindly permit ads on our free website.

It appears that you are using an ad blocker. We rely on advertising to support our website, provide free information, and sustain our services. Kindly consider whitelisting our website to allow ads.